An open-source, live-first instrument for the M-VAVE FM-1. A virtual analog synth and a drum machine on four looping tracks, played like an instrument: no menus on stage.
Play freely and press CAPTURE: what you played loops, in time. Undo anything. Glide between scenes with one knob. Hold a key to stutter or sweep. Let the Creative Engine mutate, humanize, fill or simplify your loops.
🇫🇷 Français — toute la documentation existe en français dans
docs/_FR, à commencer par l'installation et l'utilisation.
| Repository | What | Licence |
|---|---|---|
| OpenVALive_FM-1 (this one) | the FM-1 firmware, its site, web installer and emulator | MIT |
| OpenVALive_CORE | the synth itself: DSP, VA and drum engines, Live Core, the app, the desktop app — here in va/ |
MIT |
| OpenVALive_SMK-37 | the same instrument on the SMK-37 Elite / Pro | GPL-3.0 |
On The Firmware Hub: FM-1_023 (this firmware) and FM-1_037 (the SMK-37's).
| 🎛️ Four tracks, one clock | synths or drums on each track, own loop lengths, swing, MIDI clock in and out |
| 🔊 29 sounds in 7 families | F1 acid (303, square, scream, deep), F2 basses (Reese, wobble, deep sub…), F3 five drum kits (808, 909…), F4 leads and keys, F5 pads, F6 textures (dub siren…), F7 your own; PRESET then OCT−/OCT+ jumps family |
| 🥁 Drum keys | the ORIGINAL map (toms high → low, choosable D# and G#) or GM, with key lights |
| 🎯 CAPTURE and LOOP EDIT | the last phrase you played becomes the loop, in time; then edit it note by note (HOME + key 15) |
| ↩️ Undo everything | 8 steps: takes, captures, creative gestures, clears, edits |
| 🧬 Creative Engine | Mutate, Humanize, Fill, Simplify, Rotate, Reverse, Euclid… one gesture each, its % shown before you take it |
| 🌗 Scenes and Morph | 8 snapshots; one knob glides between two of them |
| 🔥 Hold-to-play effects | stutter, filter, delay throw, drive — push and release: the arrow ↑ shows what letting go takes |
| 🎚️ CONTROL MAP and SOUND EDIT | choose what the knobs control; every parameter, the modulation matrix and tempo-locked LFOs |
| 🔌 MIDI & audio | MIDI in over USB and TRS, MIDI out over USB, controller mode, USB audio |
| 🌐 Try it without an FM-1 | the whole firmware runs in your browser |
| I want to... | Do this |
|---|---|
| try it now | the browser emulator |
| install it on my FM-1 | the web installer (Chrome / Edge), or the latest release: OpenVALive-FM1-X.Y.Z.zip, then FLASH-FM1.bat (guide) |
| bring back a unit that no longer starts | jieli-usbkey-unbrick (also in recovery/): a Raspberry Pi through the USB cable, the unit stays closed |
| build everything on Windows | double-click INSTALL-WINDOWS.bat (WSL, toolchain, tests, firmware, flash) |
| build on Linux | git clone --recursive, then 15 — from zero to a flashed FM-1 |
| play it on my PC | the desktop app of OpenVALive_CORE |
targets/fm1/ the FM-1 target: app.h (name, flash map), app.c and ols_dsp.c (one line each: the app in va/),
fm1.toml, site, manual, simulator scripts
va/ OpenVALive CORE, a git submodule pinned to one version (sh scripts/va.sh status)
recovery/ jieli-usbkey-unbrick (submodule): bring back a unit that no longer starts
scripts/ va.sh / va.ps1 (the submodule), Windows / WSL install, flash, update-prebuilt
tests/ run_tests.sh: OpenVALive CORE's tests, no-libc build, the app in the fm1-base simulator
docs/ _EN (English) and _FR (français)
| English | Français | |
|---|---|---|
| Overview | 01 | 01 |
| The synth inside: how it is wired | 03 | 03 |
| Install | 04 | 04 |
| Using the FM-1 | 05 | 05 |
| Troubleshooting | 10 | 10 |
| How the firmware is built (JieLi) | 11 | 11 |
| Web simulator and site | 14 | 14 |
| From zero to a flashed FM-1 | 15 | 15 |
| Publishing (releases, The Firmware Hub) | 17 | 17 |
| Rules: code, git, publishing | 18 | 18 |
| FM-1 test plan | 19 | 19 |
| The sounds and the drum keys | 20 | 20 |
The synth, the Live Core, writing an engine, the API: OpenVALive_CORE's docs. To pick the project up: STATUS.md · CLAUDE.md · CONTRIBUTING.md · CHANGELOG.md.
fm1-base (Charles Vestal, MPL-2.0) and felucca-bsp (Leo Kuroshita / Hügelton Instruments, MPL-2.0). Thank you — none of this would run without their work. OpenVALive is not affiliated with or endorsed by M-VAVE or JieLi.
Licence: MIT (LICENSE).

