FPGA / RTL design engineer · Computer Engineering @ Toronto Metropolitan University
I design digital hardware: RTL in VHDL and Verilog, IP integration in Vivado, and the C++ drivers that sit on top of it. I spent 16 months as an FPGA design engineering co-op at Evertz Microsystems, and I'm now looking for hardware, RTL design and FPGA engineering roles.
FPGA Design Engineering Intern, Evertz Microsystems (16-month co-op)
- Integrated and brought up high-speed IP on AMD/Xilinx Zynq UltraScale+ devices in Vivado, including a runtime-switchable 10G/25G Ethernet design with RS-FEC
- Debugged GT transceiver placement conflicts, MMCM/clocking violations and AXI register-control issues at the IP boundary
- Wrote C++ driver code for low-level register control: status, lock detection, error counters and mode switching
| Project | What it is | Stack |
|---|---|---|
| Cache Controller | Direct-mapped, write-back / write-allocate cache between a CPU and SDRAM model. Handles all four hit/miss cases; timing verified on hardware with ChipScope ILA captures | VHDL · Spartan-3E · ISE · ChipScope |
| FPGA Pong (VGA) | Two-player Pong in pure hardware: 640×480 @ 60 Hz VGA, no CPU or frame buffer, per-pixel rendering, LFSR serve, frame-synchronous game logic | VHDL · Spartan-3E · ISE |
| HDMI Colour Bars | DVI/HDMI video output from scratch: VGA timing generator, MMCM pixel and 5× serial clocks, TMDS encoding via rgb2dvi |
Verilog · Zynq-7000 · Vivado |
| 32-bit RISC CPU | Multi-cycle 32-bit CPU with a custom 26-instruction ISA: datapath, ALU, FSM control unit, memory, simulated and run on an FPGA | VHDL · Cyclone IV · Quartus · ModelSim |
HDL & design: VHDL, Verilog, FSM design, clock-domain and timing closure, AXI, memory hierarchies, video timing (VGA / DVI / HDMI) FPGA tools: Vivado, Vivado IP Integrator, ILA / ChipScope, Xilinx ISE, Intel Quartus Prime, ModelSim Devices: Zynq UltraScale+ MPSoC, Zynq-7000, Spartan-3E, Cyclone IV Interfaces & IP: 10G/25G Ethernet, RS-FEC, GT transceivers, MMCM/PLL, TMDS Software: C++, C, Python, HCS12 assembly Lab: oscilloscope, logic analyser, board bring-up
- Final year of Computer Engineering at TMU
- Capstone: an autonomous indoor delivery robot. I own the drive platform: chassis, motors, motor drivers and power
Most projects include a full write-up (PDF) with block diagrams, state diagrams and waveform captures.