A standalone desktop AI workspace with the Infinite network deck built in.
OpenDeath is an independent Windows desktop application created from scratch for this project. Its identity, command deck, status bar, settings experience, installer, and relaunch-resume engine are original work. Under the hood it runs on the OpenCode engine, so the sessions, tools, agents, providers, and sign-in flow you already use keep working.
It is not a plugin, a theme, or a wrapper around the OpenCode window. OpenDeath ships as its own executable with its own application data and a bundled engine. The source is public at https://github.com/saintedKyle/opendeath-src.
OpenDeath does not launch, replace, or modify your OpenCode Desktop installation. The setup wizard verifies that OpenCode Desktop is present, then installs and launches
opendeath.exeonly.
| One-click network rotation | Move the exit IP without leaving the chat. Auto, WARP, Proxy, SOCKS5, Route64, Mullvad, Windscribe, or Direct. |
| Keep the conversation going | When a provider free limit appears, OpenDeath rotates and sends continue to the waiting chats. |
| Survives a restart | Waiting chats are written to disk and resumed after the app relaunches. |
| Ready out of the box | WARP is required and the wizard installs it before the app. Windscribe, Mullvad, and WireGuard can be added from their official sources. |
| A desktop, not a demo | Native tabs, diffs, terminal, built-in browser, dictation, themes, rainbow mode, and a full settings surface. |
| Settings | Personalization |
|---|---|
![]() |
![]() |
- Eight connection modes: Auto, WARP, HTTP Proxy, SOCKS5, Route64, Mullvad, Windscribe, None
- Reset limit — clear the current allowance and retry the last prompt
- Auto-rotate — 1 to 50 attempts, with burned-IP memory for 24 hours
- Fix connection — diagnose and rebuild the selected route
- Status — current IP, route, and engine state
- Continue after relaunch — resumes waiting chats after the app restarts
- Parallel
continuedelivery to every waiting chat, with duplicate-send protection
- Sessions, tabs, project files, diffs, and a built-in terminal
- Built-in browser and page inspection
- Voice dictation
- Light, dark, and system themes
- Custom background, rainbow accents, and text color
- Redesigned Settings → Control room with Basic, Advanced, and Personalization tabs
- Portable single executable, or a guided setup wizard
- Per-user install, no administrator account required
- Optional dependency checkboxes for WARP, Windscribe, Mullvad, and WireGuard
- Desktop and Start menu shortcuts that point to OpenDeath, never OpenCode
- Clean uninstaller that leaves your chats and settings in place
Grab the latest build from Releases.
| Asset | Best for | Notes |
|---|---|---|
OpenDeath-Setup-1.0.3.exe |
Most people | Guided wizard, shortcuts, optional VPN installs, uninstaller |
OpenDeath-Portable-1.0.3.exe |
No install | Runs from any folder or USB drive |
SHA256SUMS.txt |
Verification | SHA-256 checksums for both binaries |
Get-FileHash .\OpenDeath-Setup-1.0.3.exe -Algorithm SHA256Compare the result with SHA256SUMS.txt from the same release.
| Requirement | Details |
|---|---|
| Windows | Windows 10 22H2 or Windows 11, 64-bit |
| OpenCode Desktop | Required. The wizard checks for it and offers the official download link if it is missing. Download OpenCode |
| Internet | Required for model providers, sign-in, and optional dependency downloads |
| Disk space | About 1.3 GB installed |
| winget | Recommended. Used only when you tick optional VPN checkboxes. Windows 11 includes it; Windows 10 can install App Installer from the Microsoft Store. |
You can select these in the setup wizard, or install them later from the vendor:
| Dependency | Purpose | Official source |
|---|---|---|
| Cloudflare WARP | WARP route and fast IP rotation | 1.1.1.1 |
| Windscribe | Windscribe route and location changes | windscribe.com |
| Mullvad VPN | Mullvad route and location changes | mullvad.net |
| WireGuard | WireGuard tunnel profiles | wireguard.com |
OpenDeath never downloads these from a third-party mirror. The wizard calls winget,
which resolves each package to the publisher's official installer.
- Run
OpenDeath-Setup-1.0.3.exe. - On the Prerequisites page, the wizard looks for OpenCode Desktop.
- If it is found, continue.
- If it is missing, click Open download page, install OpenCode Desktop, then click Check again.
- On Choose components, tick any optional VPN clients you want. Leave them unchecked if you prefer to install them yourself.
- Choose whether to create Desktop and Start menu shortcuts.
- Install, then leave Launch OpenDeath checked on the final page.
The wizard installs to %LOCALAPPDATA%\Programs\OpenDeath and creates an uninstaller in
Settings → Apps → Installed apps.
OpenDeath-Portable-1.0.3.exe needs no installation. Run it from any writable folder.
It extracts to a temporary directory at launch and keeps user data in
%APPDATA%\dev.opendeath.desktop.
.\OpenDeath-Setup-1.0.3.exe /SOptional components are not selected in silent mode. Add /COMPONENTS only if you need a
custom unattended configuration.
- Open Settings → Control room and choose a connection mode.
- Click Fix connection to validate the route.
- Click Status to confirm the exit IP.
- Start a chat. The deck stays under the title bar while you work.
WARP is required and the wizard puts it in place. The other VPN modes require their client to be installed and signed in.
OpenDeath starts its own local OpenCode service, loads the desktop interface from a local bundle, and manages the network route that the service uses.
- The bundled engine lives in
resources/opencode-cli.exe. - The UI is loaded from
resources/app.asar— there is no remote web app. - The service listens on a loopback port chosen at startup. Nothing is exposed to the LAN.
- Provider requests still go to the providers you configure. OpenDeath adds no proxy of its own.
When a free limit is detected, the network layer rotates the exit, waits for the new route to become healthy, and asks each waiting chat to continue. If the app closes with chats still waiting, the list is saved and restored on the next launch.
The source is public: https://github.com/saintedKyle/opendeath-src. This is the user-facing layout of the installed application, not the build tree:
%LOCALAPPDATA%\Programs\OpenDeath\
├─ opendeath.exe Main application
├─ Uninstall OpenDeath.exe Uninstaller
├─ resources\
│ ├─ app.asar Packaged application UI
│ ├─ opencode-cli.exe Bundled OpenCode engine
│ ├─ opencode-cli.version Engine build identifier
│ └─ icons\ Application icons
├─ locales\ Electron language packs
├─ *.dll, *.pak, *.bin Electron runtime files
└─ LICENSE.electron.txt Electron license
User data is separate from the installation and survives upgrades and uninstalls:
%APPDATA%\dev.opendeath.desktop\
├─ infinite.json Connection and rotation settings
├─ infinite\pending.json Chats waiting to resume
├─ logs\ Local diagnostics
└─ ... Window, theme, and session preferences
OpenDeath has no background self-updater. Download the new release and run the setup wizard over the existing installation. Your settings and chats are preserved.
To update the portable build, replace the old executable. User data is unchanged.
Use Settings → Apps → Installed apps → OpenDeath → Uninstall, or run
Uninstall OpenDeath.exe from the install folder.
The uninstaller removes the application and shortcuts. It does not delete
%APPDATA%\dev.opendeath.desktop, so your settings and waiting chats remain available if
you reinstall.
| Problem | Fix |
|---|---|
| Windows SmartScreen warning | The build is not code-signed. Choose More info → Run anyway, or verify the SHA-256 first. |
| “OpenCode Desktop was not found” | Install it from opencode.ai/desktop, then click Check again in the wizard. |
| Optional VPN did not install | Confirm winget --version works, then install the client from its official site. Network restrictions can block winget. |
| WARP / Windscribe / Mullvad mode is unavailable | Install the client, sign in, start it once, then restart OpenDeath. |
| WARP will not register | Cloudflare sometimes refuses new registrations. Run warp-cli --accept-tos registration new, then Fix connection. |
| App looks blank after an update | Close OpenDeath, delete %APPDATA%\dev.opendeath.desktop\Cache, and relaunch. |
| Need a clean reset | Close OpenDeath and rename %APPDATA%\dev.opendeath.desktop to dev.opendeath.desktop.bak. |
More detail: docs/TROUBLESHOOTING.md.
- OpenDeath adds no telemetry, analytics, or usage reporting.
- Network probes go to Cloudflare’s trace endpoint and the selected provider only.
- VPN clients are separate products with their own privacy policies.
- Free proxies can observe traffic metadata. Use HTTPS providers.
- Rotating an IP to bypass a provider’s free-tier limit may violate that provider’s terms. You are responsible for how you use the app and for complying with the services you connect to.
OpenDeath is closed-source. This repository is the official distribution and documentation hub; it contains no application source code.
- Original OpenDeath work: proprietary, see
LICENSE. - Third-party components: see
THIRD-PARTY-NOTICES.md. - OpenDeath is not affiliated with OpenCode, Cloudflare, Windscribe, Mullvad, WireGuard, All trademarks belong to their owners.
For GPL source-offer information, read the third-party notices.
Built by saintkyle.
Thanks to the OpenCode project for the engine, and to Cloudflare, Windscribe, Mullvad, and WireGuard teams for the network tools this app integrates with.



